For all CB Radio Coax Nuts , Joints, antenna and antenna Joints

Use This Conductive Grease When you assemble your base antenna at all the joints, And where the coax nut connects to the antenna

Use it when you Mount your mobile antenna stud to the mount, and when you connect the mobile antenna to the coax

Use it when you assembly the Wilson Magnet Mount to the Base

Use it when you insert your Whip antenna into the stud.

ANYWHERE YOU WANT CONTACT WITHOUT CORROSION OR MOISTURE

NO-OX-ID is not a grease that can be washed off and breakdown in the presence of water or acid,

it is a moisture and corrosion resistant rust preventive compound.

Conductive Grease and Electrical Contact Lubricant
"NO-OX-ID A-Special Electrical Grade"

THIS Stuff works with ALL Metals.with all Electrical Currents,

and Metel to metal contacts to TOTALLY

Prevent Moisture and corrosion from invading a Union

Specific uses

• Aerial cable
• Aluminum cable
• Anchor rods
• Battery holders
• Battery terminals
• Battery posts
• Boot jack contacts
• Bolted connections
• Brackets
• Bus Bar systems
• Cables & clamps
• Antenna Connection unions

• Connectors
• Contact points
• Electrical conduit
• Guy wires
• High line towers
• Insulators
• Junction boxes
• Manhole hardware
• Nuts & bolts
• Steel conduits
• Steel fittings
• Antenna mounts

• Steel poles
• Switchgear
• Temper screws
• Threaded connections
• Transformer Bases
• Turnbuckles
• Wires
• Circuit Breaker
• Switches
• Drawout Breakers
• Antenna Coax Nuts
• Rotor mounts

Works with ANY Antenna, Base Mobile, Marine, Police Fire scanner

any Battery connection, Watch Battery, AAA thru Car battery,

Any Metal , Steel, Brass, Copper, Nickel Aluminum

ANY place you want to conduct electricity WITHOUT Corrison or Moisture invading the joint

ANY place you want to bond two metal surfaces, WITHOUT Them Rusting or corroding together.

NO-OX-ID "A-SPECIAL" is the electrical contact grease of choice for new electrical installations and maintenance.NO-OX-ID is an electrically conductive grease that keeps metals free from rust and corrosion. This electrically conductive grease which been used in the power industry for over 65 years to prevent corrosion in electrical connectors from low micro-power electronics to high voltage switchgear. NO-OX-ID electrical grease prevents the formation of oxides, sulfides and other corrosion deposits on copper, aluminum, and steel surfaces and conductors.

The purpose of a electrical contact lubricant is to prevent corrosion and lubricate the connection for easier maintenance. NO-OX-ID "A-Special" electrical grease prevents corrosion attack on all metal surfaces. Attack can come from battery acid, salt, moisture and various industrial chemical vapors in the environment. When this conductive paste is used on aluminum connectors in joints, NO-OX-ID "A-Special" prevents the reformation of oxide films, which cause high resistance and subsequent failures.

NO-OX-ID A-Special conductive grease is recommended by connector manufacturers for trouble-free joint connections. When nuts, mounting bolts, and cotter keys are coated with NO-OX-ID "A-Special", they will never rust or freeze assuring you easy, trouble-free removal. NO-OX-ID "A-Special" should be used wherever the formation of a corrosive product will effect the proper functioning of the metal surface. This electrical contact grease is easily applied, easily removed, and gives long lasting reliable performance even on dissimilar metals.

TRUCK, AUTOMOTIVE AND MARINE ELECTRICAL SYSTEM MAINTENANCE

• Apply a thin coat of this electrically conductive grease to mini-lamp bases before inserting into sockets.
• Apply to base of lamp socket and lens contact area.
• Apply to all electrical conduit connections by packing the end of the tubing and nut before connecting to box connection.
• Apply to all wire terminal connections and wire splice connections.Dip the spade or ring into the NO-OX-ID
• Apply to all electrical junction box connections or terminal posts in light system, starter cable connections, alternator terminal connections, battery posts connectors and ground connections.
• Apply a thin coat of this electrically conductive lubricant to 7-way trailer plug connections and VW cable connector.
• Use NO-OX-ID A-Specialas a battery terminal grease to prevent battery corrosion for your car battery maintanance and marine battery maintanance.For battery connections coat the post, screw, clamp, terminal liberally with NO-OX-ID.A little NO-OX-ID goes a long way!
  

Why should you use NO-OX-ID A-Special on your battery terminals?NO-OX-ID prevents the premature death of your battery by preventing the white corrosion material from forming on the posts.When this white corrosion appears on your battery terminals it exponentially reduces the charge to the battery and from the battery to your engine.This excessive corrosion resistance formation will shorten your battery life.To insure good starts throughout the year, the condition of your battery posts (keeping them free of corrosion) is as important as changing your cars oil.

Battery corrosion is a serious business, which is why most major industrial companies recommend the use of NO-OX-ID on backup battery systems and critical electrical connections.Industrial battery companies prefer NO-OX-ID for field applications because they can not afford to replace a battery cells due to overheating and failure due to corrosion and neither can you!

Please read my About Me page or Call 609-485-2485, ..............................Leave a msg If I can't Pick up, . ., I can also be contacted at Redman Cb Stop orRedman CB Parts !!, . ., ... . !!, . !

.

For More Information about This unit !!